- support@activisu.com
- Monday – Friday, 9 am – 7 pm: +33 (0)1 76 49 29 91
Disinfecting equipment with ACTIVISU®
// COVID-19: disinfecting equipment with ACTIVISU®
The 3 recommended methods for cleaning and disinfecting equipment: frames*, measurement mirrors, clips.
For each method, first wash your hands with soap or hydroalcoholic gel for 30 seconds.
01. Soap cleaning
Position the frames or clips under a stream of water and add a knob of liquid soap.
Rub your hands together to lather the soap and clean all surfaces for 30 seconds.
Rinse to remove residual soap, then dry with a disposable non-woven paper towel.
02. 70° alcohol in spray disinfection
Unless the manufacturer contraindicates the use of isopropyl alcohol at 70° by volume in spray (see instructions manual), clean all surfaces of the frame, clip or mirror with the spray.
Let the excess alcohol evaporate or wipe it off with a disposable non-woven paper towel.
03. Cleaning and virucidal wipes** disinfection
Unless the manufacturer contraindicates it (see instructions manual), use the wipe over all surfaces during the disinfection time indicated on the packaging.
Then wipe if necessary with a disposable non-woven paper towel.
*Source: Acuité.fr. Always check the manufacturer’s recommendations for cleaning frames.
**Cleaning and virucidal wipes in accordance with standard EN 14476 or NF EN 14476, without bleach, dye or perfume, with a disinfectant concentration of less than 0.5%.
